LNEYA Industrial Chillers Manufacturer Supplier -
News
Attention points for the use of laboratory chiller manufacturers’ equipment
In the laboratory, a wide range ofexperimental instruments are widely used. When the experimental instruments arein operation, they are inseparable from the high-low temperature circulatingdevice refrigeration heating equipment. What should be paid attention to whenthe high and low temperature circulating devices are in operation?The high and low temperature circulationdevice uses the coolant as a medium to transfer heat generated by otherinstruments or equipment that need to be cooled,...
View details
Installation and maintenance of industrial water chiller
As a industrial temperature control device,industrial water chiller is often in 24-hour operation. Therefore, it is veryimportant to choose a industrial chiller with good performance. Wuxi GuanyaRefrigeration Technology Co., Ltd. specializes in the manufacturing, research,development, production and sales of industrial temperature control equipmentsuch as industrial water chiller and ultra-low temperature chiller. 15 years ofconcentration and experience have made LNEYA's industrial wate...
View details
Maintenance and maintenance of battery pack test temperature simulation chiller
The battery pack test temperature simulation chiller is more and more widely used in enterprises, but the subsequent maintenance and maintenance are also more important. Here is a brief introduction to some maintenance and maintenance methods. 1. The temperature of the battery pack that does not need to be opened is not closed before the start-up to simulate the water inlet valve of the condenser on the chiller, resulting in water leakage. Part of the cooling return water flows away from the...
View details
Precautions for changing the refrigerating oil in the cooling system of the car charger
The cooling system of the car charger should pay attention to the condition of the refrigerating oil during the operation. After the compressor is started, carefully observe the changes in the oil temperature and oil pressure. If the oil changes color, the oil must be changed until the system is clean. Piston refrigerators that are normally put into production and operation must undergo a limited period of maintenance after long-term operation and replace the refrigerating oil. 1. Refrigerati...
View details
Characteristic Analysis of Industrial Air Cooled Chiller
Industrial air-cooled chillers are generally integral machines, that is, evaporator, compressor and condenser are made together. For a slightly high-power air-cooled industrial chiller, the heat dissipation of the condenser cooling fan needs to be considered. Since the heat exchange source of air-cooled chiller is air and equipped with special fan, it is called "air-cooled chiller". It is widely used in medical, biological, chemical, laser, metallurgy, equipment manufacturing, electroplating,...
View detailsWhat is the difference between glycol chillers and water-cooled chillers?
Both glycol chillers and chillers can be used to satisfactorily dissipate the heat generated during production. The fundamental difference between the two types of chillers is the variation in their freezing point and heat transfer capabilities. Pure ethylene glycol or a mixture of ethylene glycol and water has a much lower freezing point than pure water. This means that glycol-based chillers are better suited for low-temperature environments. In contrast, water has a better ability to retai...
View details
Structural Characteristics of Industrial Recirculating Chiller
In the chemical reaction, there are strict requirements for the reaction temperature. It is necessary to raise the temperature to an appropriate temperature to carry out the chemical reaction smoothly. After the reaction, the temperature in the reactor must be reduced to room temperature. The existing heating system of the reactor is relatively simple, so the process of reducing the temperature in the reactor to room temperature takes a long time, and the thermal energy can not be used reason...
View detailsHow to Choose Chiller and Injection Moulding Machine?
A. First way:The 1HP water-cooled chiller can be equipped with 80 tons locking force injection moulding machine, and the temperature can be controlled at 5-10 degrees.The 1HP water-cooled chiller can be equipped with 100 tons mould-locking force injection machine, and the temperature can be controlled at 10-15 degrees.The 1HP water-cooled chiller can be equipped with 120 tons mould-locking force injection moulding machine, and the temperature can be controlled at 15-20 degrees.(The matching o...
View detailsApplication Of Compressor In Low Temperature Chiller
Compressor is an important part of cryogenic refrigeration industry. As far as low temperature chiller is concerned, different brands and types need to be selected when buying compressors. Therefore, when choosing cryogenic refrigeration compressors, we should pay attention to the advantages and disadvantages of each compressor and make better choices. The cryogenic refrigeration compressors mainly include semi-enclosed piston refrigeration compressor, rotor refrigeration compressor, screw re...
View detailsDevelopment Of LNEYA Low Temperature Chiller
With the internationalization of the economy, Wuxi Guanya has seized the opportunity. It not only develops rapidly in China, but also actively develops foreign markets, and becomes one of the important enterprises in the development of low temperature chiller industry. In recent years, the technological development of Wuxi Guanya low temperature chiller has made breakthroughs, and has been drawing closer to the international cryogenic refrigerator technology level, and developed a high-precis...
View details
