Defrosting Method of Ultra Low Temperature Freezer

Defrosting method from the top 10 manufacturers of ultra low temperature freezer Wuxi Guanya = There are many manufacturers of ultra low temperature freezer, Wuxi Guanya is one of them. Many enterprise users don’t know much about the defrosting after purchasing the ultra low temperature freezer. So Wuxi Guanya, a professional manufacturer, has specially arranged the relevant defrosting methods.

When using ultra low temperature freezer, you need to realize that the thicker ice does not mean the better refrigeration effect. On the contrary, the thicker the ice, the lower the cooling effect will be. So how can we quickly defrost? The top ten manufacturers of ultra-low temperature freezer know that the freezer can be automatically defrosted by directly unplugging the power supply, but the speed is very slow. Now, Guanya will introduce two methods of rapid defrosting.

Defrosting method from the top ten manufacturers of ultra low temperature freezer:

It is more convenient to clean the ultra-low temperature freezer after melting it by an electric fan or a hairdryer. However, the hairdryer is generally not recommended. Because this temperature is not easy to grasp, it is likely to cause internal deformation due to high temperature, so it is worth the loss. However, the hairdryer is generally not recommended, because the temperature is not easy to control, the high temperature is likely to cause internal deformation, which will make the loss outweighs the gain. Use boiling water to melt ice. Of course, instead of pouring the boiling water directly onto the frost, but place it in a container, then close the door and melt the frost by slowly increasing the heat. If the top is not a metal evaporation plate, the container should be covered. The hot towel can be applied on the frost to make the ice layer fall off quickly, but the top ten manufacturers of ultra low temperature freezer remind that the shortcoming of this method is that it always needs hand support. The above three methods are mainly for the removal of the already formed frost.

Defrosting method from the top ten manufacturers of ultra low temperature freezer:

Apply a layer of food oil around the ultra-low temperature freezer, so that the suction between the frost and the inner wall of the cabinet is much reduced. Then it is easier to remove the frost, but this method is generally not recommended by the top ten manufacturers of ultra low temperature freezer because It is never a good thing that the inner wall of the cabinet is always oily. Put a layer of plastic film on the inner wall of the ultra low temperature freezer, then you only need to remove the film when deicing. This method is effective, and the effect will be more obvious if better films are used. The films can also be used repeatedly. Of course, these are the defrosting methods that the top ten manufacturers of ultra-low temperature freezer arranged for enterprise users. Replacing in time and paying attention to cleaning up is recommended. Lneya has the best ultra low temperature freezer price.