LX -15℃～30℃

Product Description
System Introduce
Knowledge Center

low temperature chiller

Model		LX-0250N	LX-0400N	LX-0700N	LX-1000N	LX-1450N	LX-2000N	LX-2600N	LX-3500N	LX-5000N
Medium Temperature Range		-15℃～30℃	-25℃～30℃
Temp. Control and Dispaly		ASET multifunctional controller, control outlet temperature of water tank
Temp. Control Optional		Temperature feedback PT100 (inlet temperature, outlet temperature)
Cooling Capacity	0℃	1.5KW	2.4KW	4KW	7.5KW	10KW	15.5KW	20kw	26.5kw	38kw
	-10℃	1KW	1.5KW	2.7KW	6.3KW	8KW	12KW	15.5kw	21kw	30kw
	-20℃		0.8KW	1.5KW	3.5KW	5KW	7.3KW	10kw	13.5kw	20kw
Circulation Pump Flow Rate, Pressure (max)		20L/min	20L/min	35L/min	35L/min	75L/min	75L/min	110L/min	200L/min	250L/min
		1.5BAR	1.5BAR	1.5BAR	1.5BAR	2.5BAR	2.5BAR	2.5BAR	2.5BAR	2.5BAR
Capacity of Liquid Storage		15L	17L	25L	30L	40L	60L	80L	150L	300L
Compressor		Tecumseh		Emerson Copeland
Evaporator		Plate Heat Exchanger
Operation Panel		7-inch color touch screen shows setting temperature and measuring temperature, temperature curve record, data export excel-format
Safety Protection		Self-diagnosis function; freezer overload protection; high pressure switch;overload relay, thermal protection device etc. security protection function.
Refrigerant		R-404A
Connection Size		G1/2	G3/4			G1		G1 1/4	DN40 PN10
Product size（cm)		4565120	4565120	55100175	55100175	70100175	70100175	80120185	95170205	120220220
Weight (air-cooled)		115KG	145kg	180kg	225kg	290kg	340kg	400kg	650kg	950kg
Power （max ) 50hz		AC220V 1.5kW	AC220V 2.2kW	AC220V 3kW	AC380V 4kW	AC380V 5kW	AC380V 6kW	AC380V 8 kW	AC380V 12kW	AC380V 17kW

Shell Material		Cold rolled steel painting
Optional		SUS304 Material
Optional Power		220V 60HZ three-phases，460V 60HZ three-phases

Product Applitions

1. The temperature of heat transfer fluid can be adjustable;
2. Adopt ASPERA,DANFOSS,MANEUROP,COPELAND etc. Brand compressor.Stable performance and can work continuously;
3. Use hot gas bypass, save energy and improve the control precision;
4. A variety of fault alarm (overtemperature alarm, high-pressure alarm, sensor alarm, compressor overheat alarm);
5. Power on delay protection;All parts are safety grounding.

The outdoor installation of air-cooled chillers make it easy to be affected by outdoor sunlight, and the ventilation and the environment and space has a direct impact on the cooling effect of the chiller. The common failure and processing method are as follows:

(1) Frequent start and stop of the compressor: there may be too much or too little refrigerant, resulting in pressure protection switch action which is resulted from too high exhaust pressure or too low suction pressure, and also poor water system circulation make sevaporator surface frost.

Method: When the refrigerant is too much, the extra can be released at the vent. If there is a shortage, check whether there are leaks of the fluorine and fill the refrigerant.

If the water circulation system is blocked or stored in the air, you should exhaust; if water circulation too small, utilize the open refrigeration water circulation system.

(2) Noisy compressor when running: check whether the expansion valve fails, the temperature package discharges the suction pipe from the compressor, which causes the liquid refrigerant return to the compressor. If it is damaged, it should be repaired, for example, if the compressor is damaged, it should be replaced.

(3) Poor refrigeration capacity: the cause of the poor refrigeration capacity may be the insufficient refrigerant and low evaporation temperature that makes the por cooling effect of the pipeline; poor heat dissipation of the condenser; too large the resistant of the water circulation system,etc..

The refrigerant pipe should be checked for leakage and fill the refrigerant after repairing.You should repair the insulation layer and Clean the condenser to check whether the fan is working properly as well as clean the pipe filter.

LX -15℃～30℃

SLJ -110℃～-150℃

Single Fluid Heat Transfer System SR

Reactor Temperature System ZLF